2021-2022 Ford Bronco 2 Door w/ Sasquatch 3-4″ Spacer Kits w/UCA – 023301 BDS Suspension

023411 4″ Kit (2Dr – base shock package)

023351 – 3.5″ Kit (2Dr – Badlands w/o Sasq)

023301 – 3″ Kit (2Dr – w/ Sasquatch)

Designed to not only provide additional ride height, this 3-4″ BDS lift kit for Bronco and comes complete ready to perform right out of the box. The 2-piece strut spacer design maintains ride quality without overextending suspension during down travel. Also supplied are a bump stop extensions to install on each of the struts to properly limit uptravel when pushing the limits with your new Bronco. To take advantage of the suspension travel a pair of BDS performance series upper control arms (UCAs) with FK uniball joints are supplied to bolt into the factory location. Built from 1.5″ OD heavy wall tubing with fully welded with integrated support gussets, these UCAs improve suspension travel while providing superior strength, clearance, and styling to the stock arms specially formed to optimize tire clearance. To provide a full solution for your Bronco, a pair of heavy duty tie rod reinforcements sleeves are also include to ensure piece of mind while you’re pushing your Bronco to the limit out on the trail. These kits are spec’d to allow clearance for 35-37″ tires, however 37s will require modification to the factory intrusion beams (aka the crash bars).

Get your Bronco lifted with BDS Suspension.

• Tire & Wheel Combinations
• 37×12.50* w/17×9 and 4.5-5.5″ back spacing
• 35×12.50** w/17×9 and 5-5.5″ back spacing

*Trimming may be required*

• Est. Installation: 5-7 hours
• Difficulty Level (easy 1 – 5 complicated): 3

Kit Components