2018-2023 Jeep Wrangler JL 4 Door 3″ Performance Series Lift Kit – 1437PS BDS Suspension

At each corner replacement ProRide coil springs, 3″ in front and 1.25″ in rear to level the stance. These springs provide additional ride height, along with allowing for increased suspension travel. The rear springs are dual rate to improve load capacity. Along with the new coil springs, these kits include front and rear bump stop extensions to properly limit suspension up travel. Front caster correction is provided by a set of lower cam lock washers or upgrade to the available HD adjustable control arms for more strength and adjustability. JKS quicker disconnects are supplied with the kit to unlock the front suspension’s potential to flex while maintaining quiet on road operation with a heavy duty adjustable design and spherical bushings. Along with the sway bar disconnects bolt-on mounting posts are supplied for each side to easily store the sway bar up out of the way when hitting the trail. In the rear extended length sway bar links are supplied to keep the sway bar at the optimal operating angle and allow more droop travel.

Now available with the new Fox 2.5 Performance Series shocks! The 2.5″ aluminum bodies with a race-developed main piston and true internal floating piston (IFP) separate gas and oil to provide consistent and fade-resistant performance. The 2.5-inch piston offers a greater force capability by moving more fluid and increasing damping and is less prone to cavitation.

• Tire & Wheel Combinations
• 37×12.50 w/20×9 and 4.5″ back spacing
• 35×12.50 w/17×9 and 4.5″ back spacing

*Trimming may be required*

• Est. Installation: 5-6 hours
• Difficulty Level (easy 1 – 5 complicated): 3

Kit Components